Photos taken on a patient treatment sheet will transfer into the EzyVet attachments section of a patient record only if the Smart Flow events are turned ON. What this means is in the parameters section of Smart Flow, if the desired parameter has events set to ON, then the photos will auto upload into the patients attachment section of EzyVet. 

If the switch is toggled to OFF, photos will not send over. 

This is how this looks in real time;

When on a patient flow sheet in Smart Flow, add the parameter to the patient's Smart Flow Sheet. In this image, you will see there are two parameters; Ben's Test Product, and Patient Photos. Ben's test product, the EzyVet Events are set to ON, the Patient Photo's parameter, the EzyVet Events are set to OFF

In both sections I have taken a picture and attached it to the treatment sheet,

Now, if we go over to EzyVet to the Dashboard, under the Smart Flow Tab, we should see that Images have come across

If we then click into the patient medical record, under the Attachments tab, we should see the photo that was taken under the Smart Flow Parameter; Ben's Test Product. You will see the corresponding name of the jpeg image is the same as the Smart Flow Parameter.

Note there is no image from the Parameter called Patient Photos because the EzyVet events are set to OFF, so it has not sent over the image to EzyVet. Images will still come over to EzyVet from Smart Flow, however they will be a part of the patient medical records PDF that comes from Smart Flow once the patient is discharged.