When your General Settings Fixed Time Templates are set to "No" you may find that when you add 24 hours some of the highlighting is not coming over when you add 24 hours. 


The most likely reason this occurs is that some highlighting has been added manually.


When adding a patient to the whiteboard you must first choose a template, from here you are able to add any additional parameters you choose in any specific "q" time of your choosing under 24 hours. Should you manually change the highlighting on the flowsheet without changing the "q" time this highlighting will not transfer over to the next days flowsheet when using the "Copy" function when adding 24 hours. 


In this example you will see the original template "Default Q6" which has treatment every 6 hours, then Hydromorphone has been added to the flowsheet to be given every 6 hours. 


If you were to add 24 hours with the "Copy" function, this template for the following day would look exactly the same. On the other hand if you were to manually highlight Hydromorphone from the flowsheet at additional times outside the "Q6" the parameter is set for, then when you add 24 hours it will copy everything but, the manually highlighted times. 


Flowsheet Hydro Times Manually Entered: (Manually highlighted times are in purple)


Flowsheet after Add 24 hours: As you can see the purple manually entered treatment times have disappeared and only the original Hydro Q6 treatment highlighting is present.